Replacement Procedures
4.4HDD
Remove a HDD
The following describes the procedure for removing a HDD (See Figure
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device.
1.Turn the computer upside down.
2.Remove the following screws securing a HDD slot cover and remove a HDD slot cover.
• M2.5⋅4.0B | FLAT BIND screw | x2 |
3. Remove the following screws securing the HDD assembly.
• M2.5⋅4.0B | FLAT BIND screw | x4 |
4. Disconnect the HDD assembly from the connector on the system board.
Satellite M300 and Satellite Pro M300 Maintenance Manual
