Toshiba M40X Power indicators, DC IN, Power, Amber, Green, Battery, Battery, Battery, Battery, Battery, No light, DC IN off, DC IN off, DC IN off, Flashing amber

Power and Power-Up Modes

		Power on	Power off (no operation)
AC adapter	Battery capacity	• Operates
not	is above low	• LED: Battery off
connected	battery trigger	DC IN off
	point
	Battery capacity	• Operates
	is below low	• Alarm sounds (depending
	battery trigger	on the Low Battery Alarm
	point	itemof CMOS SETUP
		menu & TOSHIBA Power
		Saver setting)
		• LED: Battery flashes
		amber
		DC IN off
	Battery capacity	Computer goes into
	exhausted	Hibernation or shuts down
		(depending on the
		TOSHIBA Power Saver
		setting)
	No battery	• No operation
	installed	• LED: Battery off
		DC IN off

Power indicators

As shown in the above table, the Battery, DC IN and Power indicators on the system indicator alert you to the computer's operating capability and battery charge status.

Battery indicator

Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.

Flashing amber	The battery charge is low. The AC adapter must
	be connected to recharge the battery
Amber	Indicates the AC adapter is connected and
	charging the battery.
Green	Indicates the AC adapter is connected and the
	battery is fully charged.
No light	Under any other conditions, the indicator does
	not light.

6-2 User’s Manual