Function setup
Customizing the function settings (Continued)
Setting details
Picture Mode
There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond). Make this selection according to the type of content being viewed.
Auto: Select this position normally.
The DVD player automatically detects source content, film or video of playback source, and converts that signal in the progressive output format in an appropriate method.
Film: The DVD player converts film content pictures in the progressive output format appropri- ately. Suitable for playback of film content pictures. The progressive output feature will be most effective under this selection.
DRC
DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.
On: Loud sound such as explosion is toned down slightly when played back. This is suitable when it is connected to a stereo.
Off: It plays back at the recording level on the disc.
Video: The DVD player filters video signal and converts it in the progressive output format appropriately.
Suitable for playback of video content pictures.
Note:
Depending on the disc, pictures may be cut off or doubled. In this case, select “Video”.
Notes:
•This function works only during playback of Dolby Digital recorded discs.
•The level of Dynamic Range Reduction may differ depending on DVD video disc.
JPEG Interval
You can continuously playback all JPEG files automati- cally.
After the selection below, the disc will start playback on which JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at 10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in 15 second intervals.
40
5X30401A [E] | 40 | 12/3/05, 3:31 PM |