Toshiba MD20F52, MD14F52 owner manual Antenna connections, Connections, Not supplied

Connections

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see page 14 for Cable TV connections.

Combination VHF/UHF antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna		Antenna
	jack		jack

75 ohm coaxial cable (not supplied)

300-75 ohm matching transformer (supplied)

Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

Connections

Combination VHF/UHF antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

Connect the UHF 300 ohm twin-lead wire to the

jack

300-75 ohm matching

transformer (supplied)

combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm matching transformer. Attach the transformer to the combiner, then attach the combiner to the antenna jack.

Combiner (not supplied)

UHF 300 ohm	VHF 300 ohm
twin-lead wire
	twin-lead wire
(not supplied)
	(not supplied)

Separate VHF/UHF antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

jack

VHF 75 ohm (not supplied)

Combiner (not supplied)

UHF 300 ohm twin-lead wire (not supplied)

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the combiner (not supplied). Attach the combiner to the antenna jack.

13

5W20101A [E] (P13-23) 13 12/23/05, 14:33