Using the audio/video inputs
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.
Press INPUT SELECT repeatedly to select the desired mode.
“LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds.
TV Channel 
LINE 1 
LINE 2
(Back) (Front)
NOTE:
In the DVD mode this key will not operate.
1. To connect the TV/DVD to a VCR
Press the INPUT SELECT to select the desired mode to use the TV as a monitor. Operate your VCR as usual.
VCR
VIDEO IN
To Audio/Video
OUT
Rear of TV/DVD
AUDIO IN (L)
AUDIO IN (R)
2. To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Camcorder
Front of TV/DVD
VIDEO IN
To Audio/Video OUT
AUDIO IN (R) AUDIO IN (L)
Audio/Video cord (not supplied)
3. To connect the TV to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game | Front of TV/DVD |
| |
| VIDEO IN |
To Audio/Video OUT | AUDIO IN (R) |
| |
| AUDIO IN (L) |
Audio/Video cord (not supplied)
2. Press GAME during Power off. The TV/DVD turns on and the GAME screen appears.
Game timer function: After one hour the Game timer display will appear every 30 minutes for about 5 seconds showing how long the time has passed up to 4 hours.
NOTES:
• You can also change the TV screen to LINE2 by pressing INPUT SELECT. But this screen is normal.
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
41
41
