Toshiba MP8640 4.2 How To Use Foot Adjusters

Downloaded from Projector.com

3M™ Multimedia Projector MP8640 © 3M 1997

4.2 How To Use Foot Adjusters

Adjust the projection position using the foot adjusters at the bottom of the projector.

Foot adjusters

unlock ←→ lock

Front view

Side view

4.2.1 Lift up the projector, unlock the foot adjusters.

4.2.2 Adjust a viewing angle, and then lock the foot adjusters.

4.2.3 For fine adjustments, rotate the foot adjusters.

Caution: Do not unlock the foot adjusters if the projector is not supported.

If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking.

Contents

Main MP8640 Multimedia Projector Operator's Guide Table of Contents Safeguards SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS INTENDED USE Warranty THANK YOU FOR CHOOSING 3M LIMITED WARRANTY LIMITATION OF LIABILITY Section 1: Unpack 1.1 Contents of Shipping Box 1.4 What Next? 1.2 Optional Accessories 1.3 Keep Your Packaging Materials Section 2: Product Description 2.1 Machine Characteristics 2.2 Main Unit Identification 2.3 System Set Up - connecting various equipment 2.4 Remote Control Transmitter Identification Insert the provided batteries (AA or R6P) into the remote control transmitter. How to insert batteries: 1. Remove the battery compartment cover. 2. Insert the batteries as illustrated inside the battery compartment. 3. Replace the cover. Section 3: Basic Operations 3.1 Installation 1 2 3 4 5 6 Page Section 4: Adjustment and Functions 4.1 Menu 1 projector or remote control MENU button. 2 STICK SWITCH. 3 4.2 How To Use Foot Adjusters Front view Side view 4.3 SETUP The menu SETUP is used to adjust the image and to move the image position. 4.4 INPUT The menu INPUT is used to select the input source. SYSTEM 4.5 IMAGE The IMAGE menu is used to alter the image. 4.5 IMAGE (continued) 4.6 OPT The OPT. menu allows you to control communication function. SETUP INPUT IMAGE OPT. COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF STARTUP Selection COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF START UP Description Section 5: Connection to Signal Terminals 5.1 Connection to the Video Signal Terminal b. Signal input terminal / output terminal a. Input signal b. Signal input terminal c. Example of computer signal 5.3 Connection to the Control Signal Terminal a. Mouse emulation 5.3 Connection to the Control Signal Terminal (continued) b. RS 232 Control Cable (not included with basic packout) Section 6: Maintenance 6.1 Cleaning the Air Filter 6.2 Message Table 6.3 Lamp Replacing the Lamp Display Lamp Operation Hours Symptom Cause 6.4 When You Think Something Is Wrong Check the following table before asking for service. If a solution cannot be found, consult dealer. Section 7: Technical Specifications 7.1 Specifications 7.2 Accessories