Toshiba MP8640 4.3 SETUP

Downloaded from Projector.com

4.3 SETUP

The menu SETUP is used to adjust the image and to move the image position.

RGB signal input Video signal input

Adjustment Item

VOLUME

BRIGHT

(BRIGHTNESS)

CONTRAST

SHARPNESS

COLOR

TINT

V.POSIT

(V.POSITION)

H.POSIT

(H.POSITION)

H.PHASE

H.SIZE

COLOR BAL

Details of adjustment

Decrease Increase

Dark Bright

Lower Higher

Soft Sharp

Less More

Red Green

Moves the picture up or down.

Moves the picture left or right.

Decreases the picture flicker

Widens or Narrows the horizontal size of picture

R=stronger Red; N=Normal; B=stronger Blue

Note: • TINT cannot be adjusted with a PAL video signal input.

• TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

• V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.

Contents

Main MP8640 Multimedia Projector Operator's Guide Table of Contents Safeguards SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS INTENDED USE Warranty THANK YOU FOR CHOOSING 3M LIMITED WARRANTY LIMITATION OF LIABILITY Section 1: Unpack 1.1 Contents of Shipping Box 1.4 What Next? 1.2 Optional Accessories 1.3 Keep Your Packaging Materials Section 2: Product Description 2.1 Machine Characteristics 2.2 Main Unit Identification 2.3 System Set Up - connecting various equipment 2.4 Remote Control Transmitter Identification Insert the provided batteries (AA or R6P) into the remote control transmitter. How to insert batteries: 1. Remove the battery compartment cover. 2. Insert the batteries as illustrated inside the battery compartment. 3. Replace the cover. Section 3: Basic Operations 3.1 Installation 1 2 3 4 5 6 Page Section 4: Adjustment and Functions 4.1 Menu 1 projector or remote control MENU button. 2 STICK SWITCH. 3 4.2 How To Use Foot Adjusters Front view Side view 4.3 SETUP The menu SETUP is used to adjust the image and to move the image position. 4.4 INPUT The menu INPUT is used to select the input source. SYSTEM 4.5 IMAGE The IMAGE menu is used to alter the image. 4.5 IMAGE (continued) 4.6 OPT The OPT. menu allows you to control communication function. SETUP INPUT IMAGE OPT. COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF STARTUP Selection COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF START UP Description Section 5: Connection to Signal Terminals 5.1 Connection to the Video Signal Terminal b. Signal input terminal / output terminal a. Input signal b. Signal input terminal c. Example of computer signal 5.3 Connection to the Control Signal Terminal a. Mouse emulation 5.3 Connection to the Control Signal Terminal (continued) b. RS 232 Control Cable (not included with basic packout) Section 6: Maintenance 6.1 Cleaning the Air Filter 6.2 Message Table 6.3 Lamp Replacing the Lamp Display Lamp Operation Hours Symptom Cause 6.4 When You Think Something Is Wrong Check the following table before asking for service. If a solution cannot be found, consult dealer. Section 7: Technical Specifications 7.1 Specifications 7.2 Accessories