Toshiba MP8640 Section 2: Product Description

Downloaded from Projector.com

3M™ Multimedia Projector MP8640 © 3M 1997

Section 2: Product Description

2.1 Machine Characteristics

The

MP8640 Multimedia Projector integrates metal halide lamp and polysilicon LCD display technology into a

single unit. It accepts input from two different computer sources and two video/audio sources and projects a bright,

super crisp image. Switching your presentation from a computer input to a video input, and then back to a computer

input simply requires the push of a button on the remote control keypad or control panel keypad.

The MP8640 Multimedia Projector offers the following features:

• 650 lumens (A highly efficient optical system with a metal halide lamp ensures high brightness)

• SVGA resolution (3 separate 800 x 600 LCD panels are used for the R, G and B signals)

• XGA compression (60 Hz and 70 Hz)

• Compact size, light weight for portability

• RGB (computer video) output terminal

• Serial, PS/2 and Apple© Desktop Bus (ADB) mouse emulation

• Power zoom and power focus functions

• Easy to set up and use

• Ability to display 16.7 million colors

• Two computer input connections

• Two video input connections (composite and S-video compatible)

• Full function remote control

• Two built-in stereo speakers (2 watt)

• Horizontal and vertical image inverting function

• Horizontal and vertical image position control

• Fixed keystone correction

• On screen menu with seven languages

• Universal power supply

• IR sensor in front and rear for maximum remote control range

• RS232 control capability

• Optional ceiling mount kit

6

Contents

Main MP8640 Multimedia Projector Operator's Guide Table of Contents Safeguards SAVE THESE INSTRUCTIONS IMPORTANT SAFEGUARDS INTENDED USE Warranty THANK YOU FOR CHOOSING 3M LIMITED WARRANTY LIMITATION OF LIABILITY Section 1: Unpack 1.1 Contents of Shipping Box 1.4 What Next? 1.2 Optional Accessories 1.3 Keep Your Packaging Materials Section 2: Product Description 2.1 Machine Characteristics 2.2 Main Unit Identification 2.3 System Set Up - connecting various equipment 2.4 Remote Control Transmitter Identification Insert the provided batteries (AA or R6P) into the remote control transmitter. How to insert batteries: 1. Remove the battery compartment cover. 2. Insert the batteries as illustrated inside the battery compartment. 3. Replace the cover. Section 3: Basic Operations 3.1 Installation 1 2 3 4 5 6 Page Section 4: Adjustment and Functions 4.1 Menu 1 projector or remote control MENU button. 2 STICK SWITCH. 3 4.2 How To Use Foot Adjusters Front view Side view 4.3 SETUP The menu SETUP is used to adjust the image and to move the image position. 4.4 INPUT The menu INPUT is used to select the input source. SYSTEM 4.5 IMAGE The IMAGE menu is used to alter the image. 4.5 IMAGE (continued) 4.6 OPT The OPT. menu allows you to control communication function. SETUP INPUT IMAGE OPT. COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF STARTUP Selection COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF START UP Description Section 5: Connection to Signal Terminals 5.1 Connection to the Video Signal Terminal b. Signal input terminal / output terminal a. Input signal b. Signal input terminal c. Example of computer signal 5.3 Connection to the Control Signal Terminal a. Mouse emulation 5.3 Connection to the Control Signal Terminal (continued) b. RS 232 Control Cable (not included with basic packout) Section 6: Maintenance 6.1 Cleaning the Air Filter 6.2 Message Table 6.3 Lamp Replacing the Lamp Display Lamp Operation Hours Symptom Cause 6.4 When You Think Something Is Wrong Check the following table before asking for service. If a solution cannot be found, consult dealer. Section 7: Technical Specifications 7.1 Specifications 7.2 Accessories