Toshiba MW20F11 Sound control adjustment, Listening to stereo sound, To select desired sound

TV operation

Sound control adjustment/

Stereo and Second Audio Program (SAP)

Sound controls are factory preset but you can adjust them individually as follows:

The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.

MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmis- sion or for other purposes.

AUDIO SELECT

// /

CANCEL

MENU

Sound control adjustment

1 option.				or	￿￿￿￿￿￿￿￿￿￿￿￿￿
Press MENU, then press					to select
				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2 Press				￿￿￿￿￿ ￿￿￿￿￿￿￿￿
	or to select “AUDIO”,￿￿￿￿￿￿￿then press .
				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
				￿	￿￿￿￿￿￿
Press	or to select the item you want to
3 adjust, then press			or		￿￿￿￿￿￿￿￿￿		￿
				to adjust the setting.
				￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿
BASS:	Press	or	to adjust the bass sound.
TREBLE:	Press	or	to adjust the treble sound.
BALANCE:	Press	or	to obtain an equal sound level
	from both speakers.
SURROUND:	Press	or	to select “ON” or “OFF”.
ON:	The dynamic presence and sound created offers
	a thoroughly enjoyable listening experience.
OFF:	Normal sound.
STABLE SOUND : Press		or	to select “ON” or “OFF”.
ON:	The Stable Sound feature limits the highest
	volume level to prevent extreme changes in
	volume when the signal source is changed.
OFF:	Normal sound.
SAP :	Press	or	to select “ON” or “OFF”.
ON:	SAP is available.
OFF:	SAP is not available.

4 After your desired setting press MENU repeatedly until the menu screen is cleared.

3To return BASS/TREBLE/BALANCE control adjustments to the factory preset levels

Press CANCEL while making sound adjustments.

32

Listening to stereo sound

When the TV is turned on or a channel selection is made, make certain the “STEREO” appears on the screen. This means that Stereo broadcasting is avail- able. You can enjoy stereo sound from the left and right speakers.

•When mono broadcasting is received, no indication is displayed.

•If the broadcast signal is not strong enough or clear stereo sound is not available, press AUDIO SELECT to change to mono sound. The noise should be eliminated. Press it again to return to the stereo sound.

CH 013

STEREO

Listening to SAP (Second Audio Program)

When the TV is turned on or a channel selection is made, make certain the SAP appears on the screen. This means that the Second Audio Program broad- casting is available.

CH 013

STEREO SAP

To select desired sound

Press AUDIO SELECT to select the desired sound.

STEREO

Broadcast	SAP setting	Audio display
MONO	OFF	MONO
	ON	MONO
STEREO	OFF	STEREO	MONO
	ON	STEREO	MONO
MONO+SAP	OFF	MONO
	ON	SAP
STEREO+SAP	OFF	STEREO	MONO
	ON	SAP

5T40301A [E]p27-32 32 3/1/05, 10:17