Toshiba MW20F11, MW24F11 Duplicating a video tape, Other functions VCR, Connection with Camcorder

Other functions (VCR)

TV/VCR

Duplicating a video tape

If you connect the unit to another VCR or Camcorder, you can
duplicate a previously recorded tape. Make all connections before	INPUT
turning on the power.

STOP

REC

SPEED

Duplicating a video tape

Preparation:

•Press TV/VCR to select the TV/VCR mode.

•Load a cassette tape with the erase prevention tab intact.

•Load a previously recorded tape into the playback VCR or Camcorder.

1 Press SPEED to select the desired tape speed SP or SLP.

It is recommended that you set the

Speed to the SP mode on the

recording VCR for best results.

Connection with second video recorder

• Select “LINE1” on step 2.

Playback VCR

To VIDEO OUT	To AUDIO (R) OUT
Audio/Video cable (not supplied)	To AUDIO (L) OUT
Recording VCR

Press INPUT once or twice to select AUDIO/

2 VIDEO input position.

“LINE1” or “LINE2” will appear on the screen.

LINE1

LINE1: on the rear panel

LINE2: on the front panel

3 Press REC.

4 Press PLAY on the playback VCR or camcorder.

5 Press STOP after duplicating a video tape.

Note:

Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

VHF/UHF To VIDEO IN

DIGITAL AUDIO

To AUDIO (L) IN

To AUDIO (R) IN

Connection with Camcorder

• Select “LINE2” on step 2.

Playback Camcorder

Recording VCR

To AV Jack

Illustration of MW20F11

To AUDIO (R) IN

To AUDIO (L) IN

To VIDEO IN Audio/Video cable (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

42

5T40301A [E]p42-43 42 3/1/05, 10:18