Toshiba MW20F11, MW24F11 Recording a TV program, To stop recording temporarily, Recording VCR

Recording (VCR)

Recording a TV program	TV/VCR
	0–9
Recording and viewing the same TV program.	CH /

STOP

PAUSE/STILL

REC

SPEED

Recording a TV program

1 Load a cassette tape with the erase prevention tab intact.

The unit will automatically turn on.

2 Press SPEED to select the desired tape speed SP or SLP.

The tape counter and SP or￿￿SLP￿￿￿￿￿￿will￿￿ appear on the screen for about 4 seconds.

To stop recording

Press STOP to stop recording.

“ ” will appear on screen for about 4 seconds.

To stop recording temporarily

Select “TV” or “CABLE” to the appropriate

3 position 26 .

TV - VHF/UHF channels

CABLE - Cable TV channels

4 Press Direct channel selection (0–9) buttons or CH / to select the channel to be recorded.

CH 110

Press PAUSE/STILL to avoid recording unwanted material.

“ ” will appear on the screen and the REC/OTR indicator will blink on and off. Press PAUSE/STILL￿￿or￿￿￿

REC to continue the recording.

REC/OTR

Note:

The pause function will be released after 5 minutes to prevent damage to the tape or the unit. The unit will change to the STOP mode.

5 Press REC.

“ ” will appear on the screen for about 4 seconds and the REC/OTR￿￿￿￿￿

indicator on the front panel will light.

REC/OTR

Notes:

•If power is switched off during recording, the TV and the DVD sections go off and the VCR continues to record. Press the STOP button to halt the recording and turn off the VCR.

•The unit channel cannot be changed during recording.

•If you record the TV program after the DVD playback, you must set the unit to TV/VCR mode using the TV/VCR button.

Auto Rewind feature

This VCR will automatically rewind the tape when the tape has ended (except during OTR and timer recording). It will also eject the tape.

Note:

If the erase prevention tab is removed, the tape will eject when REC button is pressed for recording.

38

5T40301A [E]p38-41 38 3/1/05, 10:18