Basic playback (DVD)
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION |
|
Keep your fingers well clear of the disc tray as it is closing. | Illustration of MW20FP1 3,5 6 5 1 4 |
Neglecting to do so may cause serious personal injury. |
DVD
VCDCD Basic playback
Preparations:
•Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. If the AC cord plug is plugged in for the first time, you need to set “Starting setup” 18 .
•When connecting to other equipment, turn the power off.
1 Press POWER on the unit or on the remote control to turn on the unit.
The Power indicator will light.
•Every time you press POWER, the unit starts from TV/VCR mode.
•When using an amplifier, switch on the amplifier.
POWER
2 Press DVD to select DVD mode.
The DVD startup screen will appear on the screen. “Reading” display will change to “No Disc”. (If DVD disc has already loaded, playback will start automati- cally.)
No Disc
DVD
3 Press OPEN/CLOSE.
The disc tray opens.
4 Place the disc on the disc tray.
With the playback side down
•There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the unit to malfunction.
•Do not place a disc which is unplayable on the disc tray.
5 | Press OPEN/CLOSE or PLAY. | ||||||||||
| |||||||||||
|
|
|
|
|
|
| The disc tray closes automatically. | ||||
|
|
|
|
|
|
| On the |
| ” changes to | ||
|
|
|
|
| OR |
| “Reading” and then playback | ||||
|
|
|
|
|
|
| commences. | ||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
| Reading | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press 
/
/
/ 
to select title, then press ENTER. Title is selected and play commences.
6 Press STOP to end playback.
3Resuming facility
• The unit records the stopped point, depending on the disc. “ 
” appears on the screen. Press PLAY to resume playback (from the scene point).
•If you press STOP again or unload the disc (“3” appears on the screen.), the unit will clear the stopped point.
3To start playback in the stop mode Press PLAY.
Notes:
•If the unit does not operate properly:
Static electricity, etc., may affect the player's operation. Dis connect the AC power cord once, then connect it again.
•When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the resuming playback mode automatically.
44
5L00201C | 44 |
20/4/04, 16:07
