137
Getting to Know the Windows® XP Media Center Edition
Media Center Setup
5.375 x 8.375 ver 2.3
Connecting the TV Signal Source When You Have an Existing Setup
This section describes how to connect the signal source from
the wall to a VCR to a TV using coaxial cable.
1Remove the coaxial cable from the VCR input, and
connect it to the input of a coaxial cable signal splitter
(not shipped with your computer or system).
2Connect two coaxial cables to the splitter outputs.
3Connect one of the coaxial cables to the VCR input, and
the other end to the coax port on the front side of the
computer.
4Connect the coaxial cable.
To connect your computer to a TV, you need a video/AV cable.
The type of cable depends on your TV.
NOTE