58 Getting Started
Connecting a printer
5.375 x 8.375 ver 2.3
To connect a USB printer:
1Plug the USB connector into one of the USB ports on
your computer
2Plug the printer’s power cable into a live AC outlet.
See your printer documentation for additional configuration
steps, or see “Setting up a printer,” below.
Setting up a printer
If you started your computer with a printer connected and
turned on, it may have been detected automatically (Plug and
Play). If this is not the case, then you must install the printer
driver for the model of printer that is connected to your
computer. You install the printer driver either by following
the instructions indicated in your printer manual or by using
the operating system Add Printer Wizard.
If you plan to set up a printer later, click Cancel.
Using the Add Printer Wizard
To set up a printer with the Add Printer Wizard:
1Click Start, Control Panel, and then Printers and
Other Hardware.
2Select Printers and Faxes.
The Printers and Faxes window appears.