84 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
the telephone number for the dial-up connection. To set up
the network connection, use the Dial-Up Networking Wizard:
1Click Start and point to All Programs.
2Point to Accessories, then to Communications.
3Click Network Setup Wizard or Network
Connections.
4Enter the phone number of your network connection and
let the program dial the number.
The computer connects with the network.
Powering down the computer
Pushing the power button before shutting down the Windows®
operating system could cause you to lose your work. Make
sure the system indicator panel’s disk light and the drive-in-
use light are off. If you turn off the power while a disk is being
accessed, you may lose data or damage the disk and/or drive.
When you power down the computer, you have three options
to choose from: Turn Off, Stand By, and Hibernation.
You can set the computer to turn on automatically at a time
you designate. This option is helpful for transferring files by
modem at night. You can set the computer to turn on and send
or receive the files while you are asleep. This option is called
Auto Power On.
TECHNICAL NOTES: Before using any of these options to
power down your computer, save your files and make sure the
disk activity lights are off.
If you change your mind and decide to continue working after
all, wait a few seconds before turning the computer on again.