73
Learning the Basics
Using the DVD-ROM or Multifunction drive
5.375 x 8.375 ver 2.3
If a DVD-ROM drive or Multifunction drive is not currently
installed in the modular bay, follow the instructions in “Using
the Modular Bay” on page 202.
TECHNICAL NOTE: Your DVD-ROM or multi-function drive is
set to play region 1 (North America) DVD-ROMs. If you play a
DVD disc from another region, the drive will automatically
change to play in the format of the other region. The drive will
allow you to change regions four times. On the fourth change,
the region will be “locked in.” That is, the drive will only play
DVDs from that last region. Note that changing from region 1
to region 2 and back to region 1 is counted as two changes.
For optimum DVD performance, it is recommended that you
play DVDs while running the computer on AC power.
You use CD-ROMs to load and run software, and to access
reference material such as catalogs, as well as listen to music.
A special feature allows you to play audio CDs even when the
computer is turned off. For more information, see “CD/DVD
control buttons” on page 75.
Drive components and control buttons
The DVD-ROM or multifunction drive resides in the Modular
Bay on the bottom-right side of the computer. The CD/DVD
control buttons are located at the front edge of the computer
and can be accessed when the display panel is closed or open.
NOTE