HW Setup

If they do not match, the following message appears. You must repeat from step 1.

Incorrect Password.

Owner String

This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown.

Display

This tab lets you customize your computer’s display settings for either the internal display or an external monitor.

Power On Display

This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties.

The Power On Display is supported with some models.

Auto-SelectedSelects an external monitor if one is connected, otherwise, it selects the internal display (default).

System LCD Only Selects the internal LCD, even if an external monitor is connected.

Boot Setting

Boot Priority Options

This tab allows you to set the priority for booting the computer. The Boot Priority Options setting window will be displayed as shown below. Click the up and down arrow buttons to adjust the priority.

You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:

USelects the USB floppy diskette drive*1.

NSelects the network.

CSelects the optical disc drive*2.

MSelects the USB memory drive.

*1 The floppy diskette drive will be used to start the computer when there is a bootable disk contained in the external drive.

*2 The optical disc drive will be used to start the computer when there is a bootable disk contained in the drive.

User’s Manual

7-3