Getting Started

■Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage.

■Do not press or push on the display panel.■Do not lift the computer by the display panel.

■Do not close the display panel with pens or any other objects left in between the display panel and the keyboard.

■When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel).

Turning on the power

This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes for more information.

■After you turn on the power for the first time, do not turn it off until you have set up the operating system. Please refer to the section Starting up for the first time for more information.

■Volume cannot be adjusted during Windows Setup.1.Open the display panel.2.Press and hold the computer's power button for one or two seconds.

User’s Manual

1-7