Toshiba P750, P755 Real Time Clock, F10, Problem, Problem, Problem, Password, Keyboard, Procedure, Procedure, Procedure, System Date, System Time, TOSHIBA Leading Innovation

Satellite P750/P755 Series

Real Time Clock

Problem

The following message is Displayed on the screen:

WARNING: CMOS Lost Power!!! Press <Esc> to resume, <F2> to Setup.

Procedure

The charge in the Real Time Clock (RTC) battery has run out - you will need to set the date and time in the BIOS setup application by using the following steps:

1.Turn on the computer while pressing the F2 key.

2.Release the F2 key when the TOSHIBA Leading Innovation >>> screen appears - the BIOS setup application will load.

3.Set the date in the System Date field.4.Set the time in the System Time field.5.Press F10 - a confirmation message will be displayed.

6.Press the Y key - the BIOS setup application will end and the computer will restart.

Password

Problem	Procedure
Cannot enter	Please refer to the TOSHIBA Password Utility
password	section in Chapter 6, Power and Power-Up
	Modes, for further information.

Keyboard

Keyboard problems can be caused by the setup and configuration of the computer - please refer to Chapter 5, The Keyboard, for further information.

Problem	Procedure
Some letter keys	Check that the numeric keypad overlay is not
produce numbers	activated - press the FN + F11 hot key and try
	typing again.
Output to screen is	Please refer to your software’s documentation to
garbled	ensure that its is not remapping the keyboard in
	any way (remapping involves changing or
	reassigning the function of each key).
	If you are still unable to use the keyboard, you
	should contact your reseller, dealer or service
	provider.

User’s Manual 8-7