Toshiba P750, P755 Removing a memory module, Close the display panel, 3.Close the display panel, 10.Turn your computer over, Install the battery pack - refer to

Satellite P750/P755 Series

8.Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed.

2

1

1. Memory module cover 2. Screw

Figure 3-5 Seating the memory module cover

9.Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required.

10.Turn your computer over.

11.Turn the computer on and make sure the added memory is recognized - to confirmed it, Start -> Control Panel -> System and Security -> System icon.

Removing a memory module

To remove the memory module, follow the steps as detailed below:

1.Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started, if required).

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Close the display panel.

4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required).

5.Loosen the screw securing the memory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost.

User’s Manual 3-24