110 Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
will go into Hibernation mode when you press the
power button.
When I close the lid
Set this option to Hibernate so that the computer
will go into Hibernation mode when you close the
display panel.
5Click Apply.
6Click OK.
The computer is now set to automatically go into
Hibernation when your option settings occur.
For more information about the Power Saver utility, see
“TOSHIBA Power Saver” on page 166.
Once the computer is configured, put the computer into
Hibernation mode by either pressing the power button or
closing the display panel, depending on the hibernation
options taken.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the
power button until the on/off light turns green. The computer
returns to the screen you were using.
If you put the computer in Hibernation mode by closing the
display panel, you can start it again by opening the display
panel.
NOTE