230 Using ConfigFreeâ„¢ with your Toshiba Computer
ConfigFree Utilities
5.375 x 8.375 ver 2.3
To connect to a Toshiba Wireless Projector:
1Click the icon in the system tray.
2Move the mouse pointer to Toshiba Wireless Projector
(DPJ), then click Connect.
Launching Quick Connect prevents you from using the
network to connect to a Toshiba Wireless Projector when the
wireless LAN Configuration is set to Ad hoc. If you are
connected to an access point, the connection is broken and re-
established later.
To review the current Toshiba Wireless Projector settings and
change them if necessary:
1Click the icon in the system tray.
2Move the mouse pointer to Toshiba Wireless Projector
(DPJ), then click Settings. The Quick Connect
properties dialog box appears.
3Complete the settings. Refer to the online help if
necessary.
4Click OK.
The default connection setting is for Ad hoc mode, therefore, if
the setting on the Toshiba Wireless Projector is in
Infrastructure mode, it will not connect, however; you can
change the settings to Infrastructure mode to match the
settings on the projector.
NOTE