4342
White BalanceAn image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
[AUTO]
(default) In this mode, the white balance is set automatically by
the camera.
[] Bright sun
[] Incandescent light bulbs (Tungsten)
[] Cloudy weather
[] Fluorescent light
[] Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 44.
* The default setting is the Bright Sun.
<Operation>
1Press the “MENU” button.
2Press the “#” button and
select [ ], then press the
“” button to confirm the
selection.
3Press “ ” and select the
mode which meets your
purpose from [AUTO], [ ],
[], [ ], or [ ]).
4Press “MENU” button to turn
off the menu display.
5Press the shutter release
button to take the picture.
Display
appearance
when [ ]
is selected.
Exposure Compensation<Operation>
1Press the “MENU” button.
2Press the “@” or “#” button
and select [ ], then press
the “” button to confirm the
selection.
3Press “%” or “fi” button to
select the desired amount of
exposure compensation, then
press the “” button to
confirm the selection.
Display
appearance
when +0.7
is selected.
This function provides a range of compensation for exposure.
Press the “%” button
to increase the
amount of exposure
(+), and the “fi”
button to decrease
exposure (–).
+2.0
⋅
⋅
⋅
+0.7
% fi
+0.3
% fi
±0.0
% fi
–0.3
% fi
–0.7
% fi
–1.0
⋅
⋅
⋅
–2.0
4Press the “MENU” button to
turn off the menu display.
5Press the shutter release
button to take the picture.
¶During flash photography, exposure
compensation is limited to the
range of ± 1.0 step, regardless of
the value shown in the display.