Issue | Cause | Solution | Refer |
|
|
|
|
The charge | The charge is | This is a safety feature. |
|
indicator turned off | automatically stopped | Keep the gigabeat in the |
|
while the AC | to limit the | charging operation. | |
adapter was | temperature increase | Charging will resume |
|
connected. | in the gigabeat. | after a while. |
|
|
|
|
|
The PC does not | The gigabeat is not | Check the connection |
|
recognize the | properly connected to | with the PC. | |
gigabeat. | the PC. |
|
|
|
|
|
|
Reset
If the issue cannot be resolved after taking the above corrective actions, reset the main unit by following the steps below:
1Unplug the AC adapter from the main unit.
2Turn “OFF” the BATTERY switch. After about 5 seconds, turn the battery switch “ON” again.
Settings won’t return to the initial state.
Execute “settings” - “restore original settings” to return to the factory defaults. (>p.88)
!Note
97