65
Getting Started

Using external display devices

Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
display hot key (F4):
Press F4 repeatedly until the setting you want takes effect. Briefly
pause each time you press the F4 key to allow time for the display to
change.
This hot key cycles through the settings in the following order (the
last two options are available if an external monitor is connected):
❖Built-in display only
❖Built-in display and external monitor simultaneously
❖External monitor only
❖Built-in display and external monitor (extended desktop)
❖Swap-Switch primary display between internal display
and external monitor when using extended desktop
(Sample Image) Display options window
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
NOTE