104 Utilities
Setting passwords
5Enter the password, then click OK.
6Click OK to exit.
7Restart the system to complete the process.
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password, TOSHIBA
strongly recommends that you save your password in a location
where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access your
computer.
To register a password for the power-on password functions:
1Click the Start button, and then in the Search field, type
TOSHIBA Assist. In the list that appears above, click your
selection.
The TOSHIBA Assist window appears.
2On the left side, click the Secure tab.
3Click the User Password icon.
4Click Registered.
5Enter your password, and then enter it again to verify.
6Click OK.
7Click OK to exit.
Deleting a user password
To cancel the power-on password function:
1Click the Start button, and then in the Search field, type
TOSHIBA Assist. In the list that appears above, click your
selection.
The TOSHIBA Assist window appears.
2On the left side, click the Secure tab.
3Click the User Password icon.
4Click Not Registered.
5Follow the on-screen instructions to remove the user password.