DELIVERY SERVICING
7.In the space to the left of the hydraulic tank, cut the cable tie holding the rod to
the top of the seat. Remove the split cotter, swing the seat backwards and connect the rod to the seat. Replace the split cotter.
Check that the contactor on the cable to the bottom of the seat is connected.
Swing the seat down and check that it is held by the catch on the left.
Connnecting the rod to the seat
IMPORTANT INFORMATION
Risk of incorrect assembly/fitting
8.Fit the armrests. Position the armrests with the greatest possible distance between them. The bolt heads should be on the inside (i.e. towards the seat back) and washers and nuts on the outside. Armrests, bolts, washers and
9.Check the engine oil level.
With the mower standing on a flat surface, check the engine oil level.
Unscrew the dipstick and pull it out. Wipe the dipstick dry and push it back.
Do not screw the dispstick down.
Pull the dipstick up again and read the oil level.
Fitting the armrests
Checking the engine oil level