REPAIRS
the diagram.
3.Pull the throttle wire casing to the far right and tighten the clamping screw.
Checking and Adjusting the Choke Wire
If the engine produces black smoke or is difficult to start, the choke wire (upper wire) may be incorrectly adjusted.
To adjust the choke, proceed as follows:
1.Release the clamping screw that secures the wire casing and set the choke control to maximum choke.
2.Check that the throttle wire is attached to the upper lever, see the diagram.
3.Pull the choke wire casing to the far right and tighten the clamping screw.
Checking and adjusting the choke wire
