Husqvarna ZTH6125, ZTH5223 manual Delivery Servicing, Check the oil level in the hydraulic tank

DELIVERY SERVICING

The oil level must be between the markings on the dipstick. If the level is near the “ADD” mark, top up with oil to the “FULL” mark.

Oil is topped up via the hole in which the dipstick sits.

Use grade SC-SH engine oil with a viscosity as per the chart below.

The engine (excluding oil filter) holds 1.5 litres of oil.

10.Check the oil level in the hydraulic tank.

The level must be 19 - 25 mm below the top of the tank. Top up if necessary.

11. Adjust the motion control levers.

a.Set the seat longitudinally in a comfortable position and swing the levers into the drive channel.

b.Hold one of the levers at a comfortable midpoint and tighten the retaining bolts.

c.Hold the other lever as far forward as the first and tighten the bolts.

	ADD	FULL
ADD	FULL
		8009-159

Engine dipstick

-20 C	-10 C	0 C	10 C	20 C	30 C	40 C
					SAE40
				SAE30
	SAE10W-30/SAE10W-40
SAE5W-20
-4 F	14 F	32 F	50 F	68 F	86 F	104 F
						8009-140

Viscosity chart

8011-565

Hydraulic tank

8011-522

Adjusting the motion control levers

English-22