Outdoor Unit
System |
| Field power supply | |
interconncection | terminal block | ||
terminal block |
|
| |
L1 L2 S |
| L1 | L2 |
|
| ||
Ground screw | Ground screw |
|
|
|
|
| |
System | Field power |
|
|
interconnection |
|
| |
wires | supply wires |
|
|
Banding band
Installation Manual
2.Remove the wire cover from back of the front pipe cover.
Wire cover
Cable cover
Wiring
1.Remove the front panel and remove the front pipe cover.
Remove the 4 screws.
Front pipe cover
3.Pass the wires through the conduit connection holes and attach the conduit connecters.
Conduit connector
4.Connect the wires to the terminal blocks and fix the wires to the wiring guide with the 2 included banding band.
Terminal block
Do not make the 
wires slack in this section.
Wire guide
Fix with the 2 banding band.
– 15 – |
