Toshiba RAV-SP360UT-UL Set louver direction, Heat operation, COOL/DRY operation, FAN operation

4-way Air Discharge Cassette Type Owner’s Manual

Set louver direction

1 Push during operation.

The louver direction changes with every push of the button.

In HEAT operation

Direct the louver downward.

Initial setup

In COOL/DRY operation

Direct the louver horizontally.

Initial setup

In FAN operation

Select a desired louver direction.

Initial setup

Start swing operation

1 Push , set the louver direction to the

lowest position, and then push again.

SWING is displayed and the louvers swing automatically.

Display during swinging

Repeat

Unit select button

1

Stop swing operation

1 Push at a desired position while the louver is swinging.

•When is pushed after that, the louver direction can be set again from the highest position.

•In COOL/DRY mode, the louver does not stop as it directs downward. If stopping the louver as it directs downward during swing operation, it stops after moving to the third position from the highest position.

Display when stopping the swing

FAN/HEAT COOL/DRY

operation operation

Unit select

•When multiple indoor units are controlled with one remote control, louver position can be set for all indoor units or each indoor unit individually.

•To set louver direction for a particular unit, push

button to display an indoor unit number in the control group. Then set the louver direction of the displayed indoor unit by following the steps outlined above.

•When no indoor unit number is displayed, all indoor units in the control group can be controlled simultaneously.

•Each time you push (left side of the button), the display changes as follows:

UNIT No.		UNIT No.		UNIT No.
1-1	Not	1-2	UNIT No.	1-3
	display		1-4

EN

– 14 – 14-EN