Toshiba SD-3860SC manual DVDVCD Selecting PROGRESSIVE scan, Advanced playback, Preparation

Models: SD-3860SC

1 44
Download 44 pages 9.58 Kb
Page 32
Image 32
Selecting PROGRESSIVE scan

Advanced playback

Selecting PROGRESSIVE scan

The progressive scan capability provides the highest resolution pictures with less

 

flicker and line structure.

 

If you are using the Component video jacks, but are connecting the DVD video

PLAY

player to a standard (analog) television, set PROGRESSIVE to Off.

If you are using the Component video jacks for connection to a TV or monitor that

 

is compatible with a progressive scan signal, set PROGRESSIVE to On.

 

DVDVCD Selecting PROGRESSIVE scan

Preparation:

Connect to a TV equipped with component jacks.

Turn ON the TV and set it to the corresponding video input mode.

Set the COMPONENT/S-VIDEO selector switch on the rear panel to COMPONENT position.

1 Press PROGRESSIVE during stop mode.

DVDVCD Selecting PROGRESSIVE scan On” will appear on the screen for approx. 4 seconds.

The unit recognizes the picture source (film or video) of the current disc according to the disc information.

2 Press PLAY to start playback.

PLAY

Preparation: To select PROGRESSIVE scan Off

Press PROGRESSIVE during stop mode.

1 Press PROGRESSIVE during stop mode. Off” will appear on the screen for approx. 4 seconds.

Notes:

Some discs may not be played back with the progressive scanning mode correctly because of the disc characteristics or recording condition.

If your TV does not accept the progressive scan format, the picture will appear scrambled if you select progressive scan output from the unit. In such a case, select PROGRESSIVE scan Off.

Once PROGRESSIVE scan on, all other video outputs are disabled except component video outputs.

You cannot make the progressive scanning mode active in following cases.

The disc is played back.

The COMPONENT/S-VIDEO selector switch is set to S-VIDEO position.

2 Press PLAY to start playback. To select PROGRESSIVE scan Off PROGRESSIVE

There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).

When the unit plays back a film source material, uninterlaced progressive output signals are created using the original information. When a video content is played back, the unit interleaves lines between the interlaced lines on each to create the interpolated picture and outputs as the progres- sive signal.

32

Page 32
Image 32
Toshiba SD-3860SC DVDVCD Selecting PROGRESSIVE scan, Advanced playback, Preparation, Press PLAY to start playback