Function setup

Customizing the Function Settings (continued)

Setting details

Digital Output

Selects the output sound format corresponding to your system connection.

1)Press SETUP button.

2)Press / button to select Audio.

3)Press button, then use the / button to select Digital Output.

4)Press ENTER

button, then use

Off

PCM

the

/

button

Raw

to

select the

 

output

sound

 

format (Off, PCM

 

or Raw).

 

 

5)Press ENTER button.

6)Press SETUP button to exit the menu.

PCM: Select when connected to a Multi-channel digital stereo amplifier.The DVD player outputs sound in the PCM Multi-channel format when you play a DVD recorded on the Dolby Digital, MPEG1 OR MPEG2 recording system.

Raw: Disc audio raw data will be output. Select “Raw” if your amplifier supports “DTS”.

Off: To disable Digital Output.

Notes

When you make a connection to a TV, Dolby Surround Pro Logic or stereo system via the analog audio jacks, select “PCM” or “Raw”.

If this DVD player is connected to a TV using HDMI, make sure to select “PCM”.

Night Mode

Night mode is equivalent to Dynamic Range Compress. When it is On, it reduces the variations between loud and soft sounds in audio output.You can still hear softer sounds and dialog even in very low volume.

Rating

Parental control

: 8. Adault

Set Password

Parental Control DVD

DVDs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD can be controlled may vary from disc to disc. For example, if the disc allowed, you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or you could lock out playback of the disc altogether.

DVDs may or may not respond to the parental lock settings. This is not a defect in the DVD player. Make sure this function works with your DVDs.

1)

Press SETUP button.

2)

Press /

to select Rating.

3)

Press

button to

 

select

Parental

control, then press

Parental control : 8. Adault

 

ENTER button.

Set Password

 

“Enter Password”

Enter Password:

screen will appear.

 

4)Press “8888” using number buttons. (Please note, this is presetting password of this unit).Then press ENTER. Press ENTER again to list the parental level.

The parental lock level is equivalent to the following ratings:

Level 1:

Kid Safe

Level 5:

PG-R

Level 2:

G

Level 6:

R

1)

Press SETUP button.

2)

Press

/

button to select Audio.

3)

Press

button, then use the /

Night Mode.

4)Press ENTER button, then use the select On or Off mode.

5)Press ENTER button.

6)Press SETUP

button to exit the menu.

button to select

/button to

: PCM

Off

On

Level 3:

PG

Level 7:

NC-17

Level 4:

PG-13

Level 8:

Adult

5) Press / to select the rating from 1 to 8. Rating one (1)

has the most restrictions while rating eight (8) can virtually

playback all DVD software.

6) Press OPEN/CLOSE button to activate the Parental Level

setting.

If the DVD has been designed to temporarily cancel the

Parental Level, the screen will change depending on which

disc is played. If you select “YES” with the ENTER button,

“Enter Password” screen will appear. Input the 4-digit

password as you have set then followed by ENTER button

and playback will start. If “NO” is selected, press the OPEN/

CLOSE” to remove the disc.

Notes

• If you input a wrong password, press CLEAR button and

re-enter your 4-digit password again.

Note

Night mode is Dynamic Range Control (DRC) option for analog audio output.

• You cannot play DVDs rated higher than the level you

selected unless you cancel the parental lock function.

32

Page 32
Image 32
Toshiba SD-K980KU, SD-6100KU manual Digital Output, Night Mode, Parental Control DVD