Toshiba SD-P1600 manual Connecting to a TV or audio system, Connections

Connections

Connecting to a TV or audio system

Connect the player to your TV or audio system.

For details of output sound, see 40 .

Connecting to a TV

Signal flow

To AV OUT

Audio/video		(red)
		TV or monitor with
cable (supplied)	To audio inputs
		(white) audio/video inputs
	To video input	(yellow)

•Make the following setting.

On-screen display	Select:	Page
“Digital Out”	“Analog 2ch”	46
		49

Notes

•Refer to the owner’s manual of the connected TV as well.

•When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

•Connect the player directly to your TV. If you connect the player via a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.

To switch between LCD screen/AV-IN/AV-OUT

Press MODE button on the player.

Each time the button is pressed, the

LCD screen will change as below.

NORMAL

AV-IN

NORMAL:	Outputs video and audio to the LCD
	of the player only.
AV-IN:	Inputs video and audio from an
	external device such as a VCR
	connected to the LCD of the player,
	thus allowing you to view video on
	the LCD of the player.
AV-OUT:	Select this to output to an external device
	such as a TV connected to the player.

Note

•NORMAL will be set the next time the player is turned on even if you turn the power of the player off while AV-IN or AV- OUT is set.

AV-OUT

54

SD-P1600_E_P53-61 54 05.1.14, 10:42 AM