TiVo CI_Install_0327_1.0 manual Two How To Install, Networking Options, Wireless

Two: How To Install

Begin TiVo DVR installation by connecting the power cord, and connecting the box to the Internet via a wired or wireless connection. Next, establish the cable source (or HD antenna: only for TiVo Premiere 2-tuner DVRs) and configure the device through the on-screen Guided Setup.

Networking Options

TiVo DVRs require an active network connection as a part of every standard installation. TiVo DVRs have a number of networking options available to accommodate various installation situations. Networking options vary based on the size of the installation.

Ethernet:

This connection type is the fastest and most-reliable connection available in homes.

Model	Ethernet Ports Speed
TiVo Premiere	10/100/1000
TiVo HD	10/100

Wireless:

Acceptable for rooms without access to a hard-wired connection.

TiVo manufactures a wireless N adapter for connecting to existing wireless networks. This accessory offers two connection methods. Before beginning installation, make sure the adapter is set to client mode. See diagram.

Client

Bridge

Restore Factory Settings

Client

Bridge

Support for wireless a/b/g/n standards

1.Wi-Fi Protected Setup (WPS): If the router supports this option, connect the wireless adapter by pressing the WPS button and then pressing the corresponding button on the wireless router. When the device stops blinking, the connection is complete. Check the router’s instruction guide to confirm the availability of this option.

04 CUSTOM.TIVO.COM CUSTOM.TIVO.COM 05