Connecting to audio equipment
You can enjoy high quality dynamic sounds by connecting the player to audio equipment.
The connecting method depends on the types of audio input, digital or audio.
Connecting to an AV amplifier (via
digital audio input)
Signal flow
Select the method according to the type of your equipment.
Caution
•When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
•The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Coaxial digital cable
(not supplied)
To BITSTREAM/PCM
The following audio systems are compatible:
･ Dolby Digital
･DTS
･MPEG2 audio
･2 channel digital stereo
AV amplifier
To digital audio input (coaxial)
Connections
Notes
•Refer to the owner’s manual of the connected equipment as well.
•If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away from the tuner and radio.
Make the | Setting | Select: | Page |
|
|
| |
following | “Digital Out” | “Bitstream” | 58 |
setting. | or | ||
| “PCM” |
|
Manufactured under license from Dolby Laboratories. Dolby and the
“DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
64
