Toshiba SD-P1900SR owner manual With analog audio inputs, Connecting to an audio system equipped

	Connecting to an audio system equipped
CAUTION
	with analog audio inputs
• When you are connecting (via the BITSTREAM/PCM
jack) an AV decoder that does not have Dolby Digital,
Digital Theater Systems (DTS) or MPEG2 decoding		Signal flow
function, be sure to set “Digital Out” to “PCM” from the

on-screen displays 58 . Otherwise, high volume sound may damage your hearing as well as the speakers.

• When playing DTS-encoded discs (audio CDs),	To AV OUT	To analog audio inputs
excessive noise may be output from the analog audio
		Red (Right) AUDIO IN
output jacks. To avoid possible damage to the audio			Audio system
		R
system, you should take proper precautions when the		L
analog audio output jacks of the player are connected to
		White (Left)
an amplification system. To enjoy DTS Digital Surround®	Audio/video cable
playback, an external 5.1 channel DTS Digital Surround®	(supplied)	Yellow (Video)
decoder system must be connected to the BITSTREAM/
		No need to connect.

PCM jack of the player.

Note

•DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player.

Make the

following setting.

Setting	Select:	Page
“Digital Out”	“Analog 2ch”	58

Connections

65