Toshiba SD-P1900SR owner manual Before calling service personnel, Symptom Cause Correction

Models: SD-P1900SR

1 76
Download 76 pages 60 Kb
Page 71
Image 71

Before calling service personnel

Check the following guide for the possible cause of a problem before contacting service.

Symptom

Cause

Correction

 

 

No power.

• The AC adapter or power plug is

• Connect the AC adapter or power plug securely.

 

 

 

disconnected.

 

 

 

 

 

 

 

 

 

• The battery pack has been removed.

• Install the battery pack.

 

 

 

• Battery empty.

Re-charge the battery.

 

 

 

 

 

 

 

The LCD turned off by

• The automatic LCD off function turned

• Turn on the player again.

 

 

itself.

the LCD off.

 

 

 

No picture on the LCD

• The AV OUT jack is connected.

• When you use the LCD of the player, unplug the AV OUT jack.

 

 

monitor.

 

 

 

 

No picture. (Other than

• The connected TV is not set to receive

• Select the appropriate video input mode on the TV so the picture from

 

 

built-in LCD monitor)

DVD signal output.

the player appears on the TV screen.

 

 

No sound.

• The equipment connected via the

• Select the correct input mode of the audio receiver so you can listen

 

 

 

audio/video cable is not set to receive

to the sound from the player.

 

 

 

DVD signal output.

 

 

 

 

• The volume is too low.

• Adjust the volume by turning the volume control.

 

 

 

• The audio receiver or TV is turned off.

• Turn on the equipment connected with the audio/video cable.

 

 

 

• The setting of output sound format is

• Select the proper audio setting.

 

 

 

incorrect.

 

 

 

 

 

 

 

 

The playback picture has

• The disc is dirty.

• Eject the disc and clean it.

 

 

occasional distortion.

• Player is in fast forward or fast reverse

• Sometimes a small amount of picture distortion may appear. This is

 

 

 

mode.

not a malfunction.

 

 

 

 

 

 

 

 

• The player was moved or given a

• Vibrating or shaking the player during playback may produce

 

 

 

shock.

distortion. This is not a malfunction. If not restored to usual status,

 

 

 

 

stop playback and start again.

 

 

 

• The disc is not set firmly.

• Remove the disc and set it again.

 

Others

 

 

 

 

Brightness is unstable or

• The effect of copy protection. If you

• Connect the player directly to the TV. Avoid connecting the player to a

 

noises are present in the

connect the player to a VTR, TV/VTR

VTR or TV/VTR combination.

 

playback pictures. (Other

combination or video selector, the

 

 

than built-in LCD monitor)

playback picture may be distorted as

 

 

 

 

DVD video discs are copy protected.

 

 

 

71

Page 71
Image 71
Toshiba SD-P1900SR owner manual Before calling service personnel, Symptom Cause Correction