Drive Connectors -SD-R5272, Audio, Mode Select, Jumper

DRIVE CONNECTORS –SD-R5272

Power	Power is supplied to your DVD drive by the connection with your computer's
Connector	+5V/+12V power cable to the power socket at the back of drive. One side of the
	plug has chamfered edges, so the power connector fits only one way

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON.

Audio	Supplies Analog and Digital sound to your system
Connectors
ATAPI	The SD-R5272 DVD drive is connected to your computer system through the
Connector	ATAPI connector.
Mode Select	The mode select jumpers are 6 straight angle pins located on the rear of the DVD
Jumper	drive.
	By placing a jumper on the pins, you can select the following functions: CL (CSEL),
	SL (Slave) or MA (Master). (see Setup for additional information).