27
Basic setup
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
Press VCR MENU. Press
SET + or –
to select
“CH SETUP”, then press ENTER.
1
Press SET + or – to select “TV/CATV”.
2
TV/CATV selection Setting channels automatically
Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”.
1
Press ENTER.
Auto tuning will begin. The channel dis-
play will count up and when finished,
the screen returns to normal.
2
CH 002
Note:
You can’t select “CH SETUP” if you set the channel to “L1” or
“L2”.
Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
3
Press VCR MENU until the menu screen is
cleared.
4
TV - VHF/UHF channels
CATV - CABLE TV channels
1,2
1,3
1,4
VCR DVD
VCR MENU
SETUP
SET +
SET –
CH –CH +
ENTER
SET +
SET –
CH –CH +
ENTER
SET +
SET –
CH –CH +
ENTER
VCR MENU
SETUP
SET +
SET –
CH –CH +
ENTER
SET +
SET –
CH –CH +
ENTER
Preparation:
•Turn ON the TV and select to the corresponding
video input.
•Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
2C53601A (E)p26-31 3/10/04, 11:3227