OPERATION
27
Operation with tape (Continued)
Dubbing and Editing
If you wish to edit or dub your camcorder (or another
VCR) recordings to this DVD+VCR, the rear (or Front)
panel mounted Audio and Video (A/V) input jacks
make the connections quick and easy. These direct
A/V jacks will also provide better picture results than
using the RF jack on the rear panel.
11
Connect the Camcorder’s (or Another VCR’s)
A/V outputs to your DVD+VCR as illustrated on
page 14.
22
Set the input channel “LINE2”. (press INPUT
SELECT to select LINE2.)
If you have connected your DVD+VCR to the A/V
input jacks on the rear of DVD+VCR, you should
select the input channel LINE1 by pressing INPUT
SELECTtwice.
33
Play the tape in the camcorder (or another
VCR). If you have a TV attached to your
DVD+VCR, you can see the video playing.
44
When your desire recording begins, press
DVD+VCR’s REC/OTR once to start.
Note:
Before recording, please confirm the recording start position.
Copying from DVD to VCR
This unit allows you to copy the contents of a DVD to a
VHS tape.
Note:
If the DVD you are attempting to copy is copy protected,
you will not be able to copy the disc. It is not permitted
to copy Macrovision encoded DVDs. “Lock” is
displayed in the display window.
11
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
22
Insert VHS Tape
Insert a blank VHS video tape into the VCR deck.
33
Press PLAYon the DVD deck.
The DVD will go into play mode
If the DVD disc menu appears, you may need to press
the PLAYmanually to begin copying.
44
Press REC on the VCR deck.
The DVD+VCR will go into Record mode.
“REC” indicator will light.
55
Stop the Copy Process
When the DVD has finished playing, press STOP(x) to
stop the DVD playback. The recording on the VCR will be
stopped automatically.
Note:
In case of insufficient tape length, the DVD+VCR will automati-
cally rewind the tape to the beginning and be ejected. it also
stops the DVD playback.