DVD Menu Options
English
Example: { Night Mode }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse / to select a setting and press OK to confirm.
Example: { On }
The setting is selected and setup is completed.
ETo exit, press SETUP.
Digital Output
Select this if you connect to a multichannel decoder/ receiver.
AIn 'Audio', press / to select { Digital Output }, then press .
{ Off }
To deactivate the digital audio output. For example, if you use the AUDIO OUT jacks to connect to a TV or stereo system.
{PCM }
Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital signal to PCM (Pulse Code Modulation).
{All }
Select this if the connected device has a
BUse / to select a setting and press OK to confirm.
Tip:
is down sampled to 48 KHz.
BUse / to select a setting and press OK to confirm.
Tip:
- When playing back disc with copyright protection, the sound will be down sampled to 48 KHz even when you select Down Sampling off.
3D Effects
To obtain expansive virtual surround sound effects from two speakers, set 3D Effects to on. This enhancement sounds only output from the Analog AUDIO OUT (L / R) jacks of the DVD player.
AIn 'Audio', press / to select { 3D Effects }, then press .You can set to { Off } or { On }.
BUse / to select a setting and press OK to confirm.
Tip:
- Only effective in playback of a DVD Video disc with Dolby Digital 5.1 bitstream.
Using the Rating setup menu
APress SETUP on the remote control. The system setup menu appears.
Language | Parental control | : 8.Adult |
Set Password
Video
Audio
Rating
Misc
Night Mode
This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
AIn ＇ Audio＇, press / to select { Night Mode }, then press .
{ Off }
Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.
{On }
Select this to set low volume output. This feature is only available for movie discs with Dolby Digital
mode.
BUse / to select a setting and press OK to confirm.
Down Sampling
You can enable and disable the digital signal for better sound output quality.
AIn ＇Audio＇, press / to select { Down Sampling }, then press .
{ Off }
If your amplifier / decoder is compatible with 96 KHz PCM, select “ Off “ . Sound is sampled at 96 KHz.
{On }
If your amplifier / decoder is not compatible with 96 KHz PCM, select “ On “ . Sound recorded at 96 KHz
Helpful hint: Press to go back to previous menu item. Press SETUP to exit the menu item.
BPress / to select {Rating }, then press .
CPress / to select an item, then press to access.
Example: { Parental control }
The options for the selected item appears.
If the selection in the menu is greyed out, that means the feature is not available or not possible to change at the current state.
DUse / to select a setting and press OK to confirm.
Example: { 8. Adult }
The setting is selected and setup is completed.
ETo exit, press SETUP.
Rating Level settings
Depending on the DVD, you may be asked to change the parental level while playing the disc. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children, or have certain discs played with alternative scenes.
AIn ' Rating ', press / to select {Parental control }, then press .
BUse the number buttons to enter the
CPress OK again to list the parental level.
{1.Kid Safe } Suitable for children.
19
