Viewing Jpeg Files, Viewing Jpeg files | Toshiba SD800KY specification

Viewing JPEG Files

You can play JPEG files that have been recorded on a CD-R or CD-RW on the DVD player.You can select a preferred view: a page of 9 thumbnail images or a single image view. Also, rotating, enlarging and shifting of each image can be possible.

To playback in HD JPEG resolution, see 32 .

Viewing JPEG files

Preparations

•Prepare a disc that contains JPEG files you want to view (see next page for Jpeg files compatibility). In Setup Menu, it is preferred to select “Original” for “View Mode”31 .

•Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function settings via the on-screen displays of the DVD player. If the TV is adjusted to other sizes, e.g. “16:9”, images will appear to be horizontally expanded. For details, refer to the owner’s manual of your TV.

1 Press OPEN/CLOSE to open the disc tray, place a disc that contains JPEG files.

Press OPEN/CLOSE to close the disc tray. A list of folders/files will appear on the screen.

Press the / / / buttons to view a different part of the image.You may move the image from the centre position to UP, DOWN, LEFT and RIGHT direction.When you reach the edge of the image, the display will not shift anymore in that direction.

To resume normal playback

Advanced

A list of files in the

disc appears. (Selection mode) e.g.

1/ 3

Repeat : Off

Mode : Normal

W: 515 H:770

Press / button to select your desired file, and then press ENTER or PLAY button to start slide show playback 33 .

Press STOP to display a folder list.

Note: When you press / button to select the left file, the selected picture will appear at the lower right corner.

Press the ZOOM repeatedly until the Off is displayed.

ZOOM	• Original picture is restored when the	Off
	appears.

•Depending on the file size, some files may not display the entire image.

To rotate an image

During playback, press the / button repeatedly to rotate the picture on the TV screen.

:rotate the picture anti-clockwise by 90o : rotate the picture clockwise by 90o.

To set transition effect

During playback, press the ANGLE button to select the transition effect: Wipe down transition, Wipe up transition,

..., No transition.

Note

playback

To quit the JPEG playback, press STOP.

• Pressing the OPEN/CLOSE button to open the disc tray can also quit the playback.

To pause playback

Press PAUSE/STEP during playback

To resume normal playback, press

PLAY.

To change the image

To view the succeeding image, press SKIP .

To view the previous image, press SKIP .

To magnify image

Press ZOOM repeatedly.

ZOOM	Each time you press the ZOOM button, the
	magnification level changes as follows:
	1	2	3	Off

The transition effect only works in 480p/576p video resolution if the HD JPEG Mode is set to “On”.

Viewing a thumbnail view

1	Press TOP MENU in full-screen review.
1	e.g.

Press the / / / to select an image, press PLAY to view one image in full-screen and automatically images will be displayed one by one again in a few seconds.