After the battery pack is fully charged;
Operation | Approx. battery life |
|
|
While in use (Talk mode) | up to 6 hours |
|
|
While not in use (Standby mode) | up to 10 days |
|
|
When TALK/BATT LOW LED blinks, all handset buttons are disabled and the battery needs to be charged. If this occurs during a call, you hear short beeps. Finish the call as soon as possible and place the handset on the base unit.
Note
If a call comes in when the battery is too low to operate properly, you will be unable to answer the call or the call will be disconnected.
WALL MOUNTING
MOUNTING ON A STANDARD WALL PLATE
Insert the bracket's tab into the base's lower tab slots, then press down on the top of the bracket to snap it into the clip slots.
Flip the switch hook
tab over so the tab Raise the antenna. holds the handset.
| ||
Telephone | Telephone Jack | |
(RJ11C) | ||
Line Cord | ||
| ||
| Power Outlet | |
AC Adaptor (AC 120V, 60Hz) | ||
7
