8. SENDING TONE SIGNAL (for Pulse service user)
Even if you have Pulse service (the
qDial the service number and wait for the connection.
wPress TONE , then enter the numbers required. You will hear the tones on the line.
9. MUTING
Press MUTE to turn off the microphone during a conversation.
The TALK/BATT LOW LED blinks. You may speak to someone in the room without the caller overhearing.
To resume normal conversation, press MUTE or TALK .
10. PAGING
To locate the handset (while it is off the base), press PAGE on the base unit. The handset beeps for 60 seconds. To stop paging, press PAGE or return the handset to the base unit or any key at the handset.
Notes
•You cannot page the handset during a call.
•Be careful not to get your ear too close to the ringer on the back side of the handset while paging, because it may be too loud.
11. OUT OF RANGE
During a call, as you begin to move too far from the base, you first hear a clicking sound. As you travel farther, the noise increases. If you travel
12