Toshiba SL-9000N-FFR-QR, SL-9000N-FFR-CA, EO1-31001 In-Line/Local, Transmission Delay Time Table

11. PROGRAMMING PROCEDURES

11.14 IN-LINE/LOCAL

11.14 IN-LINE/LOCAL

Menu Page: 2

Item No.: 3

When the SL-9000 is used as a satellite in an in-line system, the “ID #” and “Transmission delay time” can be set by the following procedure.

<MENU>

Page 2

3

◇	TMCC
Select mode

Set ID numbers (Range: 0-255)

ENTER

lOFF-line

The transmission delay time can be set when in-line system is selected for TMCC.

(Refer to Table 5)

ENTER

l

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

NOTES: 1. The TMCC baud rate is fixed to 4800 BPS.

2.After setting the ID #, turn the power switch OFF and ON again.

3.This setting is not available in case that the Initial set #13-6 is set to 1 (LAN: allowed).

gTable 5: Transmission Delay Time Table

	TR-Time (ms)			TR-Time (ms)
1	20	- 39	6	120 - 139
2	40	- 59	7	140 - 159
3	60	- 79	8	160 - 179
4	80	- 99	9	180 - 199
5	100	- 119

The default is 3.

11-23