Connection
Before connection
•Read the owner’s manual of the device you are connecting to the projector.
•Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.42 , etc.
•Turn off the power of both devices before connecting.
•The figures are sample connections.
•The MONITOR terminal outputs analog RGB signals or component video signals (Y/PB/ PR) from the COMPUTER IN terminals as selected with the INPUT button. If no input is selected, the MONITOR terminal outputs the input signals last selected among the COMPUTER terminals.
•A computer monitor usually cannot accept Y/PB/PR signals correctly.
Monitor
To video output
AV cable (not supplied)
Computer (for control)
To audio | p.44 |
input | |
Audio cable | To |
(not supplied) | terminal |
| Control cable |
|
|
| AUDIO IN |
MONITOR | COMPUTER | CONTROL | |
|
AUDIO OUT
| RGB cable | AV cable |
|
| (supplied) | (not supplied) | Audio cable |
Computer |
|
| |
To RGB output | To | (not supplied) | |
|
| ||
|
| output |
|
To audio output
Notes
•Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.
•When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.
•Output volume of AUDIO OUT terminal can be adjusted by the VOL button.
22
