Reset the lamp timer, Used Lamps | Toshiba TDP-S8 specification

7Reset the lamp timer.

See the lamp’s manual for instructions on resetting the lamp timer.

Notes and Precautions

•It is recommended that the lamp be replaced after 2,000 hours of use.When [Lamp time] reaches 2,000 hours,the icon and a message will appear. (After 2,000 hours, they will appear when the power is on at the ﬁrst time every 100 hours.) This display disappears when you press the button.

•Attach the outer lamp cover correctly so that it is not loose. If it is not attached correctly, the projector may fail to be powered on or the lamp may fail to come on.

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mer- cury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

Maintenance

37

Image 37

Toshiba TDP-S8 owner manual Reset the lamp timer, Used Lamps

Contents

Data Projector TDP-S8 USA only Safety Precautions Before Using Power Sources Ventilation Important Safety InstructionsSource of Light Cleaning Power-Cord ProtectionHeat Water and Moisture Do not place the product vertically Lightning stormsObject and Liquid Entry Stack Inhibited Damage Requiring Service AccessoriesServicing Replacement Parts Important Safety InstructionsSafety Check Do not use the product in a closed installation state Important Precautions Power Supply Cord SelectionPlace and Manner of Installation Save Original Packing Materials Exemption Clauses Important PrecautionsAvoid Volatile Liquid Copyrights Other Cautions and InformationsDisposal Trademarks Remote Control Batteries Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel and remote control Parts on the rear panel Loading dry-cell batteries Into the remote control Preparing and using the remote controlOperating the remote control Placement Styles PlacementFloor-mounted front projection Projection Distance and Size As seen from the side Before connection Connection Turning the power on Press the ON/STANDBY button Turning the power on and off Press the ON/STANDBY button again Turning the power off Press the ON/STANDBY button Select the language When using the ﬁrst time Turn on the powerBasic operations Activate the connected device Adjusting the screen size and focus Projector placement angle adjustments To adjust the horizontal angle, use Tilt adjuster To stow the foot adjuster, hold up the projector Using auto setting Only for analog input from computer Using handy featuresPress the remote control’s Auto SET button Correcting the keystone distortion Cutting off the picture and sound temporarily Mute Password functionFreezing the image Freeze Key Lock If you forgot the password, please inquire your dealer Using handy featuresRe-enter the same password for conﬁrmation How to use the menus Using the menus Image adjustment menu Detailed description Screen size Display setting menuBackground Default setting menu Using the menusDetailed description Fan mode Lamp power B/P R Displaying Information Status display When the lamp is broken Lamp replacementAbout lamp Lamp replacement Used Lamps Reset the lamp timer Lens cleaning Lens and main unit cleaningMain unit cleaning Power went out during use No powerTrouble indications Lamp went out during use, or won’t come on Before calling service personnel List of general speciﬁcations SpeciﬁcationsSeparately sold product Speciﬁcation Speciﬁcations List of supported signals RGB signals List of supported signals Video, S-Video signals List of supported signals Y/PB/PR signalsPin assignment of Computer in & Monitor terminals Pin assignment Control terminal