Toshiba TDP-T95 Before calling service personnel, Specifications, List of general specifications

as well.

Before calling service personnel

If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.47

If This Happens	Check
No power	• Is the power cord plugged in? Is it connected to the projector?
	• Is the outer lamp cover attached properly? p.44
Power goes out	• Is the ambient temperature high? p.47
during use	• Is the air intake or air exhaust blocked? p.47
No picture	• Is the projector turned on? (When [Auto input search] is [Off]) p.40
	• Is the mute function on? p.30
	• Is the brightness setting minimized? p.35
	• Are the connections set up correctly? p.22
	• Are all the connected devices functioning properly?
No audio	• Is the mute function on? p.30
	• Is the volume setting minimized? p.27
	• Are the connections set up correctly? p.22
	• Are all the connected devices functioning properly?
Picture not	• Is the input signal supported by the projector? p.50 , p.51
displayed	• Is there something generating an abnormal video signal, for
correctly	instance the video tape?
Picture blurred	• Is the lens dirty? p.46
Part of picture	• Is the lens focus adjusted optimally? p.27
out of focus	• Is the projection distance within the projector’s supported range? p.21
	• Is the projector’s screen placement angle tilted too far? p.21
	• Are the sharpness or sampling phase adjustments off? p.35
Image is dark	• Are the brightness or contrast adjustments off? p.35
	• Is the lamp nearing the end of its service life? p.42
Colors too light	• Are the color, R-level, G-level, or B-level adjustments off? p.35
Bad shading	• Is the screen dirty?
	• Is the blackboard mode set properly? p.37
	• Is the lamp nearing the end of its service life? p.42
Control panel	• Is the key lock function on? p.41
key doesn’t work
Remote control	• Is the remote control ON/OFF switch set off? p.19
doesn’t work	• Is the remote control code identical with the projector's code? p.41
	• Are the remote control’s batteries drained?
	• Are the batteries inserted into the remote control correctly? p.19
	• Is the remote control being used within the effective range? p.19
	• Are there any obstructions between the remote control and projector?
	• Are there any fluorescent or other bright lights shining at the
	projector’s infrared remote sensor?

Specifications

■List of general specifications

	Item	Specification
Consumption Power		TDP-T95: 310 W
		TDP-T100: 380 W
Weight		TDP-T95: 2.9 kg
		TDP-T100: 3.0 kg
External Dimensions		300 ⋅ 99 ⋅ 218 mm (W ⋅ H ⋅ D)
(including protruding parts)
Cabinet material		PC+ABS resin and ABS resin
Conditions for usage environment		Temp: 5°C to 35°C; relative humidity: 30% to 70%
Display pixels		1 chip DMD™
Picture elements		786,432 pixels (1024H ⋅ 768V)
Lens		Zoom lens F=2.07-2.64 f=20.5-32.8 mm
Lamp		TDP-T95: High-pressure mercury lamp (210 W)
		TDP-T100: High-pressure mercury lamp (275 W)
Projection screen size		30-300 inches
Projection distance		1.07-11.09 m
Speaker		1W (Mono)
	COMPUTER 1	Mini D sub 15 pin RGB / Y/PB/PR (dual use)
	IN terminal
terminal	COMPUTER 2	Mini D sub 15 pin RGB / Y/PB/PR (dual use)
	IN terminal
	MONITOR terminal	Mini D sub 15 pin RGB / Y/PB/PR (dual use)
	S-VIDEO terminal	Mini DIN 4 pin
Connection
	AUDIO (L/R) terminal	RCA Pin Jack ⋅ 2, 1.5 V (rms), 22 kΩ or more
	VIDEO terminal	RCA Pin Jack, 1 V (p-p), 75Ω
	AUDIO (L/R) terminal	RCA Pin Jack ⋅ 2, 1.5 V (rms), 22 kΩ or more
	AUDIO IN terminal	3.5mm dia. stereo mini-jack, 1.5 V (rms), 22 kΩ or more
	AUDIO OUT terminal	3.5mm dia. stereo mini-jack
	CONTROL terminal	Mini DIN 8 pin (RS-232C)

Notes

•This model complies with the above specifications.

•Designs and specifications are subject to change without notice.

•This model may not be compatible with features and/or specifications that may be added in the future.

■Separately sold product

Replacement Lamp for TDP-T95	Model TLPLW9	Others
Replacement Lamp for TDP-T100	Model TLPLW10

48 49