Specifications (Continued)
■CONTROL terminal
●Pin assignment
|
|
| Pin No. | Signal Name | Description |
| 7 |
| 1 | RXD | Receiving data |
8 | 6 |
| 2 | CTS | Consent to send |
|
|
| 3 | DSR | Data set ready |
5 |
| 3 | 4 | GND | Signal ground |
| 5 | RTS | Request to send | ||
|
|
| |||
| 4 |
| 6 | N.C | No connection |
2 | 1 |
| 7 | TXD | Sending data |
|
|
| 8 | GND | Signal ground |
Mini DIN 8 pin connector
●Interface format
1 | Communication method | ||||||||||||
|
|
|
| Stop Bit Length: | 1 bit |
|
| ||||||
2 | Communication format |
| STX (02h) | Command (3Byte) | ETX (03h) |
| |||||||
|
|
|
| Only 1 command valid per communication. | |||||||||
3 | Data format |
|
| For input commands, only | |||||||||
|
|
|
| alphanumeric characters supported. |
|
| |||||||
|
|
|
|
|
|
|
|
|
| ||||
4 | Replies | Acknowledge |
| ACK (06h) | CR (0Dh) | Data |
| ... Normally ended | |||||
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
| ACK (06h) | ESC (1Bh) |
| ... Aborted | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| No acknowledge | NAK (15h) |
|
|
|
|
|
|
| |||
If commands are to be sent consecutively, wait for the response from the projector before sending the next command.
● Main Commands
Item | Command |
Power on | PON |
Power off | POF |
Icon display on | MO0 |
Icon display off | MO1 |
Auto setting (RGB input) | PAT |
Status display on | DON |
Status display off | DOF |
Note
• Contact your dealer for control cable and other commands.
52
